1. Home
  2. News
  3. Unipoe News
27/11/2019 Unipoe News
Recently, the IEEE802.3bt standard has finally been approved. The newly approved IEEE 802.3bt standard is aimed at the rapidly growing market demand and driving force, laying the foundation for the st...
21/07/2018 Unipoe News
When a POE powered switch is used in a network, its working process is as follows:Detection: At first, the POE powered switch outputs a very small voltage at the port until it detects the IEEE802.3af ...
22/07/2018 Unipoe News
Common powered switch: Most of them are Ethernet switches with data transfer functions. In practical networking applications, you can simply imagine it as a plug-in. Of course, its function is much mo...
23/07/2018 Unipoe News
1. Power of your own deviceThe power of the POE powered switch should be in proportion to your own device. If the power of your device is below 15W, then choose a POE powered switch that supports the ...
24/07/2018 Unipoe News
1. Simplify wiring and save labor costA single cable can satisfy data transmission and power supply at the same time. POE eliminates the need for expensive power supply and installation of power, whic...
25/07/2018 Unipoe News
1. CertaintyThe MAC protocol of Ethernet, CSMA/CD, can make the network conflict, especially when the network load is too large. For an industrial network, if there is a large number of conflicts, the...
26/07/2018 Unipoe News
The differences between industrial POE switch and common switch are mainly reflected in their function and performance.The environment of the industrial site is worse than the ordinary environment, wh...
27/07/2018 Unipoe News
Industrial switch POE is also known as industrial Ethernet switches, which are Ethernet switch devices used in industrial control applications. Due to the adopted network standards, its openness, wide...
28/07/2018 Unipoe News
Industrial Ethernet switches POE are specifically designed to meet the needs of flexible industrial applications, providing a cost-effective industrial Ethernet communications solution. And its networ...
29/07/2018 Unipoe News
The density of electronic components used in modern electronic devices has been becoming higher and higher, which will cause thermal coupling between components through conduction, radiation and conve...