Featured PoE Injector&Splitter
A 95W high PoE injector captures 802.3bt standard, which solved the trouble because of a single device required high PoE, eg. a high speed dome this PoE injector takes a good compability to the PD device in TI, Microsemi, Linear solution etc.
Power over Ethernet (PoE) injectors enable network administrators to pair PoE-ready networking devices with non-PoE devices to create a flexible network architecture. PoE injectors converge power and data inputs into a simple PoE output and simplify the deployment of powered devices such as Voice-over-IP (VoIP) phones, IP surveillance cameras, and Wireless Access Points (WAPs). Our 802.3af /at options offer a simple plug-and-play installation with mid-span, gigabit, and industrial injector options.
PoE injector is a kind of item combined with Ethernet data and power line in the same cable, it is good to use on the fixed cabling without PoE switch, but the end site is a PD device(PoE receive device), Unipoe supplies a series of gigabit 30W, 65W, 95W PoE injector.
PoE Splitter is just opposite to a PoE injector, it is divided data and power from a same ethernet cable, mostly used with a PoE switch, but the end site is a non-PoE device. Unipoe supplies a series of 12W, 30W, 60W PoE splitter.
You can then split the PoE signal into different power and data sources, making it possible to run non-PoE devices. It also offers 10/100/1000BASE-T support, is safe and reliable power over existing Ethernet infrastructure, is IEEE 802.3 pre-standard, IEEE802.3af compliant with higher power, and has high power from data or spare pairs of Ethernet line. It also supports high power over 2-pairs – up to 60W input.