UNIPOE IOT Technology Co.,Ltd.
News Banner

Common Categories and Setting Methods of Smart Network Switches

Common categories

24 port or 48 port Gigabit uplink 10/100M smart network switch 16, 24, or 48 port full Gigabit smart network switch Stacked 24 port or 48 port Gigabit uplink 10/100M smart network switch Stacked 24 port or 48 port full Gigabit smart network switch POE 10/100M or full Gigabit smart network switch

Setting methods

Because of the built-in operating system, in a sense, a smart switch can be regarded as a computer, and of course, it can be managed. At present, there are mainly the following management methods: 1. Through the WEB management, the administrators can connect the switch with a common computer. After inputting the switch's IP address (can be self-set or default), they can see the management page and manage the switch. 2. As for the TELNET remote terminal management, some of them provide a simple menu, others can be managed through the command, the general CISCO switch has a complete set of management commands. It is worth noting that the command has different modes, users of different levels use different commands. 3. As for SNMP management, we can manage and monitor switches through some SNMP software. The main setting methods are above, and the high-end switches are all managed by commands.
Related News
  • Switch Industrial POE Issues

    Switch Industrial POE Issues

    July 21, 2018The density of electronic components used in modern electronic devices has been becoming higher and higher, which will cause thermal coupling between components through conduction, radiation and conve...view
  • Advantages of POE Internet Switches

    Advantages of POE Internet Switches

    October 10, 20181. Simple deployment. Digging holes, pulling wires, and installing power sockets are not needed when using POE switches. Only with one RJ45 port, different power supply modes can be provided for the e...view
  • Application of Smart POE Switch

    Application of Smart POE Switch

    October 10, 2018ApplicationSmart POE switches popularize all over the world. At present, more and more small and medium-sized office users, commercial users and enterprise users are rapidly accepting this type of swi...view
  • Working Process of POE Powered Switch

    Working Process of POE Powered Switch

    July 21, 2018When a POE powered switch is used in a network, its working process is as follows:Detection: At first, the POE powered switch outputs a very small voltage at the port until it detects the IEEE802.3af ...view
  • Advantages of Switch POE Industrial

    Advantages of Switch POE Industrial

    July 21, 20181. CertaintyThe MAC protocol of Ethernet, CSMA/CD, can make the network conflict, especially when the network load is too large. For an industrial network, if there is a large number of conflicts, the...view
  • Advantages of  High POE Switch

    Advantages of High POE Switch

    July 21, 20181. Simplify wiring and save labor costA single cable can satisfy data transmission and power supply at the same time. POE eliminates the need for expensive power supply and installation of power, whic...view
  • TEL:+86-769-86001588(Ext. 122, 123)
  • EMAIL:info@unipoe.com
  • ADDRESS:11th Fl., BLDG. B1, Guangda WE Valley, Songshan Lake District, Dongguan, China