UNIPOE IOT Technology Co.,Ltd.
News Banner

Can Manageable Gigabit Switch be Connected to Hundred Megabit Network Cable

Manageable Gigabit Switch can be connected to a 100 - megabit network cable, only this route can only use a hundred megabit network, it can not reach the level of gigabit.

Both gigabit and 100 megabit network cable are used in the T586B standard. (unless crossover lines are required between devices).

If you want to reach gigabit speed, it is best to use category six line for connecting manageable gigabit switch, category five line can not, ultra category five line looks at the quality of the line and the distance between transmission.

Here we need to introduce the performance of  category six line:

Category six line: The transmission frequency of this type of cable is 1Mhz~250 Mhz, the synthetic attenuated crosstalk ratio(PS-ACR) of category six cabling systems should have a large margin at 200 MHz, which  provides twice as much bandwidth as the ultra category five. The transmission performance of category six cable is much higher than that of ultra category five standard, it is most suitable for applications where the transmission rate is higher than 1Gbps. One important difference between category six and ultra category five is that: it improves the performance in crosstalk and echo loss, for a new generation of full-duplex high-speed network applications, the excellent performance of echo loss is extremely important. The basic link model is eliminated in the category six standard,. the routing standard adopts the star topology, and the required routing distance is as follows: the length of the permanent link should not exceed 90 m, and the length of the channel should not exceed 100 m.

If you confirm that the hardware is working well. Try to set one or both of the ports to 100 M full - duplex / or half - duplex, it will be more stable.

Related News
  • Choosing Correct Manageable Network Switch

    Choosing Correct Manageable Network Switch

    July 21, 2018According to the 7 layer network model of OSI, the switches can be divided into layer 2 switch, layer 3 switch, layer 4 switch and so on, all the way to the layer 7 switch. The layer 2 switch based on...view
  • Advantages of POE Internet Switches

    Advantages of POE Internet Switches

    October 10, 20181. Simple deployment. Digging holes, pulling wires, and installing power sockets are not needed when using POE switches. Only with one RJ45 port, different power supply modes can be provided for the e...view
  • Unipoe Manageable Gigabit Switch

    Unipoe Manageable Gigabit Switch

    August 2, 2018With the innovation of video surveillance technology, 1080P resolution has become mainstream, the transport bit stream rises above 4 Mbps, if the switch used in the surveillance field stays at a 100-...view
  • Teach you to Understand the Important Parameters and Indicators of PoE Powered Switches (Second)

    Teach you to Understand the Important Parameters and Indicators of PoE Powered Switches (Second)

    July 15, 20192. What is backplane bandwidthBackplane Bandwidth of the switch, also known as switching bandwidth, is the maximum amount of data that can be throughput between switch interface processor or interface...view
  • What is Smart Network Switch

    What is Smart Network Switch

    October 10, 2018A smart network switch is a "blade" server that supports special applications such as protocol sessions, remote mirrors, tape emulation, and internal network files and data sharing. From the architect...view
  • The Difference between POE Switch And Hubs

    The Difference between POE Switch And Hubs

    July 21, 2018In today's global networked era, the Internet has become a must for human life. As an important device for the establishment of a local area network: managed POE switch and hubs all play the role of a...view
  • TEL:+86-769-86001588(Ext. 122, 123)
  • EMAIL:info@unipoe.com
  • ADDRESS:11th Fl., BLDG. B1, Guangda WE Valley, Songshan Lake District, Dongguan, China